• Make installing that next engine a breeze with the all new PiVOT Articulated Engine Lift from Macs Tie Downs here at CLR Garage.

    The Mac's PiVOT bolts to the intake manifold and has an adjustable arm that controls tilt of a complete V-8 engine and transmission up to 35° angle. The direct bolt-on design of the Mac's PiVOT not only eliminates the lashing problem that can be encountered with chains, but also eliminates the problem of finding a place to attach chains to keep the engine level side to side. The compact design clears the firewall when the engine and transmission are tilted upward and keeps from scratching freshly painted firewalls.   The body is fabricated of thick steel plate and full-length welds. With a 1,200 lb. capacity, it will not bend like other adjustable lift plates. The grade 8 cap screws are rated to 1,500 lbs. to provide safe use for all iron and aluminum manifolds. It fits most two- and four-barrel carburetors, including Rochester, Carter, Holley, Stromberg and the 1050 Holley Dominator. Incredibly efficient, it only takes 18 minutes to install a flathead and '39 trans using Mac's PiVOT and optional adapter plate.  
    • What's included: (1) PiVOT lift plate
    • Angles engine and transmission while on a lift for easier removal or install
    • Adjustable arm tilts engine and transmission up to 35° angle
     
  • Use what we use and enjoy Free Shipping too! Race Ramps are used exclusively here at CLR to load and unload race cars. These low profile ramps make it easy to keep things from dragging as you load vehicles with low clearance. They are light weight which cuts down on hauling weight and store easily.   Each trailer application is a little different , make sure of your application prior to ordering. Unsure of your measurements, visit the Race Ramp calculator here
  • Out of stock
    CURT #17057 Used on our tow rigs to help getting to the track a little safer and easier on our equipment. **Note Ball is Not Included. For more information see https://www.curtmfg.com/part/17057 Other weight ranges available in our Shop.
    • Levels tow vehicle and trailer by redistributing a portion of the tongue weight
    • Grease zerk fitting provides easy, continuous lubrication
    • Equipped with round, forged steel spring bars for reliable strength
    • Heavy-duty, fabricated head can be adjusted for precise leveling
    • Features built-in sway control attachment tabs
    • 2" shank can be flipped to provide necessary drop or rise
    • 2-1/2" x 2-1/2" WD replacement shank also available
    • Hookup brackets and lift handle allow for easy leveraging of spring bars
    • Protected by a highly durable carbide powder coat finish
    • Limited lifetime warranty (one-year finish, one-year parts)
    Notes:
    • Includes shank, spring bars, head, hookup brackets, pin & clip
    • Trailer ball not included
  • EXT92457 - EXTANG TRIFECTA 2.0 TRUCK BED COVER

    The Extang Trifecta 2.0 from the RealTruck family of brands here at CLR. Shop now with Free Shipping!!

    EXT92457 FITS: 2020 CHEVROLET SILVERADO 1500 BED LENGTH:6' 7"
    *** Before purchase please verify if you have New Body Style or Legacy (Chevy)/Limited (GMC) on 2019 Silverado/Sierra 1500 -- This part is for the New Body Style.
    EXT92457 Application Note: New Body Style   Double check application here: https://truck-hero.com/extang-trifecta-truck-bed-cover/2020/chevrolet/silverado-1500
     Installation Guide The best selling soft Tri-Fold cover just got better. The Trifecta 2.0 has softer curves and sleek design that creates smoother, more contoured, low profile appearance. The tarp is constructed of heavy-duty, leather grained fabric with an integrated corner tuck system that has improved tarp tension and keeps your truck looking great. The newly redesigned frame, hinges, and corners provide more structural strength than before. Strongest in the industry, the frame is made of lightweight aircraft grade aluminum. The new MAX hinges are rugged and have a double pivot design. Our exclusive snap on seals eliminate adhesive and remain in place for ultimate weather protection.
    • Heavy duty leather grain fabric provides clean lines and a low profile appearance
    • Extang's clamping system attaches to your truck in seconds for easy installation
    • Our Extang Engineered cab clamps attach directly to your bed flanges without damage/alteration to your bed caps
    • EZ-Lock Clamps requires minimal effort to operate and self-locks in position when attached to the bed flange for added security
  • EXT92480

    The Extang Trifecta 2.0 Tonneau Cover from the RealTruck family of brands here at CLR. Buy now with Free Shipping!!

    EXT92480 FITS:

    2020 FORD F-150

    BED LENGTH:6' 7"
    NOTE***** CARGO MANAGEMENT SYSTEM: With Deck Rail System. Double Check application here: https://truck-hero.com/extang-trifecta-truck-bed-cover/2020/ford/f-150
    The best selling soft Tri-Fold cover just got better. The Trifecta 2.0 has softer curves and sleek design that creates smoother, more contoured, low profile appearance. The tarp is constructed of heavy-duty, leather grained fabric with an integrated corner tuck system that has improved tarp tension and keeps your truck looking great. The newly redesigned frame, hinges, and corners provide more structural strength than before. Strongest in the industry, the frame is made of lightweight aircraft grade aluminum. The new MAX hinges are rugged and have a double pivot design. Our exclusive snap on seals eliminate adhesive and remain in place for ultimate weather protection.
    • Heavy duty leather grain fabric provides clean lines and a low profile appearance
    • Extang's clamping system attaches to your truck in seconds for easy installation
    • Our Extang Engineered cab clamps attach directly to your bed flanges without damage/alteration to your bed caps
    • EZ-Lock Clamps requires minimal effort to operate and self-locks in position when attached to the bed flange for added security
  • EXT92422

    The Extang Trifecta 2.0 from the RealTruck family of brands here at CLR with Free Shipping!!

    2020 RAM 1500

    BED LENGTH:6' 4"
    CARGO MANAGEMENT SYSTEM:Without RamBox
    MULTIFUNCTION TAILGATE:Without Multifunction Tailgate
    Before purchase please verify if you have New Body Style or Classic Body Style on 2019-2021 Ram 1500 -- This part is for the New Body Style
    NOTE: Will work WITH or WITHOUT Multifunction Tailgate
    EXT92422 Application Note: New Body Style Double Check Application Here: https://truck-hero.com/extang-trifecta-truck-bed-cover/2020/ram/1500
     Installation Guide
    The best selling soft Tri-Fold cover just got better. The Trifecta 2.0 has softer curves and sleek design that creates smoother, more contoured, low profile appearance. The tarp is constructed of heavy-duty, leather grained fabric with an integrated corner tuck system that has improved tarp tension and keeps your truck looking great. The newly redesigned frame, hinges, and corners provide more structural strength than before. Strongest in the industry, the frame is made of lightweight aircraft grade aluminum. The new MAX hinges are rugged and have a double pivot design. Our exclusive snap on seals eliminate adhesive and remain in place for ultimate weather protection.
    • Heavy duty leather grain fabric provides clean lines and a low profile appearance
    • Extang's clamping system attaches to your truck in seconds for easy installation
    • Our Extang Engineered cab clamps attach directly to your bed flanges without damage/alteration to your bed caps
    • EZ-Lock Clamps requires minimal effort to operate and self-locks in position when attached to the bed flange for added security
  • RGR15100.08 RUGGED RIDGE TREKKER WINCH Replace that worn out winch or install one for the first time with a quality Rugged Ridge Trekker with free shipping from CLRGarage!! RGR15100.08 RUGGED RIDGE TREKKER WINCH Specifications: Capacity: 10,000 lb Type: Synthetic Rope & Wireless Remote

    DESCRIPTION

    The Rugged Ridge Trekker Series of electric recovery winches offer today's off-road enthusiast trail-proven reliability and impressive power, with the quality and features that ravage the competition. The brawn behind the Trekker Series lineup is the heavy duty 5.6 / 6.6 series-wound motor that delivers consistent pull strength through a bulletproof 3-stage planetary drive gear. A 212:1 gear ratio means you see quicker line speeds, getting you back to wheeling in record time. And since the real world is where these winches really shine, we equipped them to survive in the worst conditions imaginable. With an IP-68 waterproof rating, they are practically impervious to all the water, dirt and sand that leaves lesser winches in a billow of smoke. Trekker Series Winches are available with a handy wireless remote and 26-meter synthetic line, while standard winch models include a traditional steel cable and a weatherproof wired remote, but can be easily upgraded for wireless control with the Trekker Wireless Remote Kit 15103.36. Best of all, we back every one with an industry-leading five year limited warranty.
    • IP68 Waterproof solenoid, motor, and gearbox
    • Durable 5.6 / 6.6 HP series wound motor for long life and extra pulling power
    • Tough 3-stage planetary gear box with 216:1 gear ratio delivering power and reliability
    • Includes remote
    • Includes 85.3 feet (26M) of 3/8" (9.2mm) diameter steel cable or synthetic rope
    • Limited 5-year warranty

    INSTALLATION

    Everything needed to attach your RGR15100.08 RUGGED RIDGE TREKKER WINCH Trekker Winch will be included and most installations can be done in less than 2 hours. https://truck-hero.com/images/brand/product-images/RuggedRidge/Winches/c41c2b76a4719929191e1b3c319caf42.pdf

    WARRANTY

    RUGGED RIDGE 5 YEAR WARRANTY When your product is purchased from Omix-ADA®/Rugged Ridge and is not separately warranted by either Omix-ADA® or the manufacturer, then this Limited Warranty gives you specific legal rights and is the only warranty Omix-ADA® makes in connection with your purchase. Omix-ADA® neither assumes nor authorizes any manufacturer, vendor, retailer, other person or entity to assume for it any other obligation or liability in connection with its products or this Limited Warranty. What is Covered? Subject to the terms, exclusions and limitations herein and with respect only to products first sold in the United States, Omix-ADA®/Rugged Ridge warrants to the initial retail purchaser (“purchaser”) only that when installed and used on purchaser’s vehicle according to supplied product installation instructions and/or warnings, purchaser’s Omix-ADA® product and family of brands (Rugged Ridge, Alloy USA, Havoc, Precision Gear, Outland Automotive) shall be free of defects in material and workmanship for five (5) years. This Limited Warranty shall be measured from the date of initial retail purchase, extends only to the initial retail purchaser and is not transferable. ALL OTHER EXPRESS OR IMPLIED WARRANTIES ARE HEREBY DISCLAIMED, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Your warrantor for these parts is Omix-ADA®, Inc, 460 Horizon Dr., Suwanee, GA 30024(770/614-6101). Omix-ADA® reserves the right to: (a.) require proof of purchase as a condition of this Limited Warranty please use warranty registration card, (b.) make future revisions to this product or it’s Limited Warranty without obligation to conform existing product or provide purchaser with prior notice.  
  • RGR11540.31 Rugged Ridge HD Front Bumper for your 2020 Jeep Gladiator. From the RealTruck family of brands at CLRGarage!

    2020 JEEP GLADIATOR                                         

    SUBMODEL:Rubicon
    Full Width w/o Winch Mount                                                                                                                                                                           
    #RGR11540.31

  • Keep your gear dry and secure with a BAKFlip MX4 cover! These covers are enough to install you can do it in your driveway, or if you are like us, even at the race track!
    BAK-448329 BAKFLIP MX4 Cover 2020 Ford F-150 5ft 7in Matte Finish
    2020 Ford F150
    SuperCrew

Go to Top